NSN 2530-00-737-7261 · NIIN 007377261 · FSC 2530
NO DASHES 2530007377261
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 90.0 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| ABGL | WIDTH | INCHES NOMINAL 1.938 |
| ABMZ | DIAMETER | INCHES MINIMUM 1.218 AND INCHES MAXIMUM 1.223 |
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES NOMINAL 1.313 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES MINIMUM 1.638 AND INCHES MAXIMUM 1.648 |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.545 |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 2.938 |
| AJLA | TEETH QUANTITY | 32 |
| APGF | DESIGN TYPE | OFFSET |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/REPLACEABLE BALL STUD |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES NOMINAL 7.750 |
| ABND | TAPER LENGTH | INCHES NOMINAL 1.313 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007376273. An older drawing citing one of those numbers resolves here.