NSN 2530-00-904-8778 · NIIN 009048778 · FSC 2530
NO DASHES 2530009048778
In Stock
ARM,STEERING GEAR
Vehicular Brake, Steering, Axle, Wheel, and Track Components
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| ADDX | SERRATION INCLUDED ANGLE IN DEG | 80.0 |
| CFCC | CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | INCHES NOMINAL 5.125 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ABGL | WIDTH | INCHES NOMINAL 1.250 |
| ABMZ | DIAMETER | INCHES NOMINAL 1.000 |
| AJLA | TEETH QUANTITY | 36 |
| APGF | DESIGN TYPE | OFFSET |
| CFBR | SECTOR SHAFT MOUNTING END OVERALL WIDTH | INCHES NOMINAL 2.375 |
| CFBS | SECTOR SHAFT MOUNTING END OVERALL THICKNESS | INCHES NOMINAL 0.750 |
| CFBW | SMALL END MAJOR DIAMETER | INCHES NOMINAL 1.070 |
| ABND | TAPER LENGTH | INCHES NOMINAL 0.750 |
| CFBY | SMALL END TEETH DEPTH | INCHES NOMINAL 0.035 |
| ABFF | FURNISHED ITEMS | SECTOR SHAFT MOUNTING END SERRATED BORE |
| CFBX | TEETH CUT ANGLE IN DEG | 1 DEGREE,37 MINUTES |
| CFBZ | DRAG LINK END CHARACTERISTIC | W/REPLACEABLE BALL STUD |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5688746 | 52788 |
| 65D35415-1 | 98750 |
| 5688746 | 0A335 |
| 65D35415 | 10001 |