NSN 2540-01-376-7246 · NIIN 013767246 · FSC 2540
NO DASHES 2540013767246
In Stock
MOTOR,HYDRAULIC
Vehicular Furniture and Accessories
Application: SPECIAL TOOLS
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAPL | TORQUE LOAD RATING | INCH-POUNDS 422.0 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 1.750 |
| AAXX | MOUNTING TYPE | FLANGE |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 5.430 |
| ABSA | SPLINE QUANTITY | 13 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.811 |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ABUJ | THREAD SIZE | 0.438-14 |
| AECS | BOLT HOLE QUANTITY | 8 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 3350.0 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 9.000 |
| AGAV | END ITEM IDENTIFICATION | SPECIAL TOOLS |
| AHNX | BOLT HOLE DIAMETER | INCHES MINIMUM 1.086 AND INCHES MAXIMUM 2.535 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UN |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ARQA | SHAFT PROTRUSION LENGTH | INCHES NOMINAL 2.437 |
| ASMM | CONNECTION QUANTITY | 2 |
| AWLS | CONNECTION TYPE | INLET AND OUTLET |
| AXFC | CONNECTION DESIGN | FLANGED AND THREADED |
| AXFD | BOLT HOLE THREAD SIZE | 0.438-14 |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 5.490 |
| AZFF | BOLT HOLE SPACING | 0.680 IN. BY 0.680 IN. |
| AZFG | MOUNTING BOLT HOLE SPACING | 2-1/2 IN. BY 2-1/2 IN. |
| FEAT | SPECIAL FEATURES | PRESSURE ANGLE 30 DEG; 8/16 PITCH |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 847940 | 27005 |
| 1378AS137-1 | 30003 |
| DV1378-135 | 11201 |