NSN 2540-01-624-5291 · NIIN 016245291 · FSC 2540
NO DASHES 2540016245291
In Stock
SHOCK ABSORBER,BUMPER
Vehicular Furniture and Accessories
Application: 2350-01-436-0005;ARMORED RECONNAISSANCE-AIRBORNE ASSAULT; A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
Technical characteristics
8 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CXFN | NOMINAL COMPRESSED LENGTH | INCHES 20.73 |
| FEAT | SPECIAL FEATURES | CLEAN THE FOLLOWING PER ANY APPROPRIATE NON-INJURIOUS PROCESS: FEMALE THREADS IN TAPERED PIN; TAPERED PIN EXTERIOR SURFACES; TAPERED SURFACES ARE TO BE DRY AND FREE OF LUBE; SHOCK ABSORBER BEARING BALL TAPERED BORE AND FLATS; THESE SURFACES ARE TO BE DRY AND FREE OF LUBE; SPARINGLY APPLY COMPOUND AN0211 OR AN0221, SPEC ASTM D 5363 TO FEMALE THREAD IN TAPERED PINS; THREAD LOCKER COMPOUND SHALL BE MINIMAL TO AVOID EXTRUDING OUT INTO MATING TAPERED SURFACES OR UNDER WASHER OR SCREW HEAD; USE OF PRIMER N OR T PERMITTED TO SPEED CURE; FOR NON-VEHICLE VERIFICATION SCENARIOS, AN ACCEPTABLE ALTERNATE TO THREAD LOCKER COMPOUND IS OIL 15W-40 I/A/W MIL-PRF-2104 OR SIMILAR; FASTEN SHOCK ABSORBER TO TAPERED PIN (12297029) WITH WASHER - 10910174-38 AND SCREW-1821BH063C175N TORQUED TO 151-166 FT/LB |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHOCK ABSORBER,DIRECT ACTION |
| CXDZ | NOMINAL EXTENDED LENGTH | INCHES 32.36 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-436-0005;ARMORED RECONNAISSANCE-AIRBORNE ASSAULT; A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE |
| APHE | OPERATION METHOD | HYDRAULIC |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906-DOD-STD-00100D(AR) AND PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80204-ANSI Y14.5--1982 |