NSN 5905-00-087-7454 · NIIN 000877454 · FSC 5905
NO DASHES 5905000877454
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.187 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.0000 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION 360 DEG SINE-COSINE AND 3RD SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 20.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 14 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.50 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.450 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2436 AND INCHES MAXIMUM 0.2439 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.200 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.3070 AND INCHES MAXIMUM 1.3170 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1ST SECTION 1000.0 AND 3RD SECTION 10000.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 1 AND 3RD SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS 1ST SECTION -10.0 TO 10.0 AND OHMS 3RD SECTION -10.0 TO 10.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.2 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.50 TO 0.50 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 2.0 AND KILOHMS 2ND SECTION 10.0 AND KILOHMS 3RD SECTION 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
Supersedes
This item replaces cancelled NIIN 009170365. An older drawing citing one of those numbers resolves here.