NSN 5360-00-757-5494 · NIIN 007575494 · FSC 5360
NO DASHES 5360007575494
In Stock
SPRING,HELICAL,TORSION
Coil, Flat, Leaf, and Wire Springs
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXLP | SPRING DEFLECTION RATE | POUNDS PER INCH MINIMUM 3.940 AND POUNDS PER INCH MAXIMUM 4.820 |
| AXLQ | SPRING FREE OUTSIDE DIAMETER | INCHES NOMINAL 1.381 |
| AXLX | COIL AXIS TO CENTER SECTION DISTANCE | INCHES NOMINAL 1.159 |
| AXMH | END ANGULAR RELATIONSHIP | END W/LH HELIX OF COIL ANGLED TO CENTER SECTION AND END W/RH HELIX OF COIL ANGLED TO CENTER SECTION |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| AXLH | COIL HELIX DIRECTION | RIGHT-HAND OR LEFT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5673 |
| AGEK | SPRING FREE LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.300 |
| AXLY | CENTER LOOP RADIUS | INCHES NOMINAL 0.245 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 0.612 |
| APCN | COIL QUANTITY | 5-3/4 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.259 |
| ABQK | END STYLE | |
| CXTH | END LENGTH | BOTH ENDS INCHES NOMINAL 1.280 |
| CXTM | END LENGTH FROM COIL AXIS TO FIRST BEND | BOTH ENDS INCHES NOMINAL 0.630 |
| CXTN | END LENGTH FROM FIRST BEND TO SECOND BEND OR END | BOTH ENDS INCHES NOMINAL 0.650 |
| CXTS | END TANGENT ANGLE | DEGREES NOMINAL 25.5 |
| CXWD | CENTER TANGENT ANGLE | DEGREES NOMINAL 210.0 |
| CXWF | CENTER STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 631 |