NSN 3020-00-911-0258 · NIIN 009110258 · FSC 3020
NO DASHES 3020009110258
In Stock
GEAR,ANTIBACKLASH,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.063 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.187 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | HUB STEEL COMP 303 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| SFTT | SURFACE TREATMENT | TEETH ANODIZE |
| STYL | STYLE DESIGNATOR | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| MATT | MATERIAL | TEETH ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | TEETH FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.090 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.025 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.313 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0080 |
| AJLA | TEETH QUANTITY | 121 |
| ANTP | BORE STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |