NSN 2510-00-460-0065 · NIIN 004600065 · FSC 2510
NO DASHES 2510004600065
In Stock
TORSION BAR,SUSPENSION
Vehicular Cab, Body, and Frame Structural Components
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFGW | FIRST END PRESSURE ANGLE IN DEG | 50.00 |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACMR | SECOND END THREAD CLASS | 2B |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 67.375 |
| CFGT | FIRST END MAJOR DIAMETER | INCHES MINIMUM 2.241 AND INCHES MAXIMUM 2.246 |
| AMER | FIRST END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.812 |
| CFHC | SECOND END PRESSURE ANGLE IN DEG | 50.00 |
| CFHF | SOLID BAR END CHARACTERISTIC AT FIRST END | THREADED HOLE |
| CFHG | SOLID BAR END CHARACTERISTIC AT SECOND END | THREADED HOLE |
| CQCF | CONSTRUCTION | SOLID |
| FEAT | SPECIAL FEATURES | 3/8 IN. CORNER RADIUS ON SMALL END |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 1.845 AND INCHES MAXIMUM 1.855 |
| ACLK | FIRST END THREAD CLASS | 2B |
| CFGQ | FIRST END CROSS-SECTIONAL SHAPE | SERRATED |
| CFGR | FIRST END TEETH QUANTITY | 44 |
| CFGS | FIRST END SERRATION LENGTH | INCHES NOMINAL 1.188 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-45387 |
| AQSS | SECOND END THREAD SIZE | 5/8-11 |
| AQST | SECOND END THREAD SERIES/TYPE DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ASRX | TWIST DIRECTION | CLOCKWISE |
| CFGX | SECOND END CROSS-SECTIONAL SHAPE | SERRATED |
| CFGY | SECOND END TEETH QUANTITY | 42 |
| CFGZ | SECOND END SERRATION LENGTH | INCHES NOMINAL 1.500 |
| CFHB | SECOND END MAJOR DIAMETER | INCHES MINIMUM 2.140 AND INCHES MAXIMUM 2.145 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 2.115 |
| AMHP | SECOND END INTERNAL THREAD LENGTH | INCHES NOMINAL 0.812 |
| MATT | MATERIAL | STEEL |
| AQSR | FIRST END THREAD SERIES/TYPE DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ADGN | FIRST END CHAMFER LENGTH | INCHES NOMINAL 0.188 |
| AQSQ | FIRST END THREAD SIZE | 5/8-11 |
| AMDS | FIRST END PITCH DIAMETER | INCHES NOMINAL 2.216 |