NSN 2920-01-134-8842 · NIIN 011348842 · FSC 2920
NO DASHES 2920011348842
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.330 |
| ABFF | FURNISHED ITEMS | BUSHING PACKAGE AND COOLING FAN AND NUT AND VOLTAGE REGULATOR |
| ABND | TAPER LENGTH | INCHES NOMINAL 1.250 |
| ABNJ | TAPER PER FOOT IN INCHES | 1.500 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.250 |
| ADER | MOUNTING STYLE | |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 7.000 |
| AGQA | LARGEST DIAMETER | INCHES NOMINAL 1.181 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 2.455 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 1.000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 300.0 |
| BCGM | RECTIFIER LOCATION | SEPARATE |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 4.690 |
| BCMG | TOP MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.377 AND INCHES MAXIMUM 0.406 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.505 AND INCHES MAXIMUM 0.535 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BZRR | THREAD SERIES | UNS |
| CFHL | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
Supersedes
This item replaces cancelled NIIN 011211853. An older drawing citing one of those numbers resolves here.