NSN 2590-01-193-1773 · NIIN 011931773 · FSC 2590
NO DASHES 2590011931773
In Stock
DRIVE ASSEMBLY SWING
Miscellaneous Vehicular Components
Technical characteristics
2 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | DRIVE ASSEMBLY OVERALL LENGTH IS 21.150 INCHES AND THE WEIGHT IS 154.750 LBS.; ALL WELDS TO BE AWS GRADE 70; BRAKE RELEASE PORT HAS REFERENCE THREAD OF 1/4-18 NPTF; SWING BOX MOUNTING SURFACE AND MOUNTING SURFACE OF RING TO BE FREE OF PAINT,OIL AND OTHER CONTAMINANTS; APPLY "NEVER SEEZ" COMPOUND TO SPLINES AND PILOT AREAS PRIOR TO ASSEMBLY; APPLY "LOCTITE" NUMBER 271 PRIOR TO ASSEMBLY; UNLESS OTHERWISE SPECIFIED TORQUE VALUES FOR ALL GRADE 5 AND/OR GRADE 8 FASTENERS SHALL BE TO THE MOST CURRENT INSPECTION METHODS BULLETIN - IMB-G-001; APPLY THREAD SEALANT AT ASSEMBLY; CAPACITY APPROXIMATELY 40 OZ. GEAR LUBE PER GROVE SPEC. A6-829-006240 (MIL-L-2105C)(85W-140); AFTER ORBIT MOTOR HAS BEEN INSTALLED REMOVE 3/8 BOLTS FROM MOTOR END OF BRAKE ASSEMBLY,CLAMP FIRMLY AGAINST MOTOR FLANGES AND RETORQUE BOLTS TO 35 FT.LBS.; APPLY RTV (SILICON) BEFORE INSTALLATION |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2CK84 | 45152 |
| 2CK84 | 75Q65 |
| 2-198-1-00075 | 12361 |