NSN 5925-00-969-8672 · NIIN 009698672 · FSC 5925
NO DASHES 5925009698672
In Stock
CIRCUIT BREAKER
Circuit Breakers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | TOGGLE 1 |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | SINGLE LOCATION AMPERES AC 3.0 |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| CQXF | INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED | HERMETICALLY SEALED |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | SINGLE LOCATION AC 240.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE HOOK 2 |
| CPRL | TRIP RELEASE CHARACTERISTIC | SINGLE LOCATION TIME DELAY |
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 125.0 |
| CPRQ | RESET METHOD | MANUAL |
| APNQ | ARC QUENCHING METHOD | MAGNETIC BLOWOUT |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED BUSHING WITH PANEL SEAL 1 |
| AAQL | BODY STYLE | |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SINGLE LOCATION SERIES TRIP |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | SINGLE LOCATION MINIMUM AT 200 PCT 0.190 AND MAXIMUM AT 200 PCT 0.600 AND MINIMUM AT 300 PCT 0.040 AND MAXIMUM AT 300 PCT 0.190 AND MINIMUM AT 400 PCT 0.010 AND MAXIMUM AT 400 PCT 0.080 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | SINGLE LOCATION AC 300.0 |
| CPRH | CIRCUIT PROTECTION TYPE | SINGLE LOCATION OVERCURRENT |
| CPRJ | TRIP RELEASE METHOD | SINGLE LOCATION MAGNETIC |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.448 AND INCHES MAXIMUM 1.510 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.567 AND INCHES MAXIMUM 0.629 |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.880 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MINIMUM 1.524 AND INCHES MAXIMUM 1.586 |
| ABXD | BUSHING LENGTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.380 |
| AKPX | POLE QUANTITY | 1 |