NSN 5962-00-111-1205 · NIIN 001111205 · FSC 5962
NO DASHES 5962001111205
In Stock
MICROCIRCUIT,DIGITAL
Microcircuits, Electronic
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAT | BODY WIDTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.275 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.070 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 50.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND ASYNCHRONOUS AND EDGE TRIGGERED AND SYNCHRONOUS |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQSZ | INCLOSURE CONFIGURATION | FLAT PACK |
| CQWX | OUTPUT LOGIC FORM | DIODE-TRANSISTOR LOGIC |
| CQZP | INPUT CIRCUIT PATTERN | 6 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | FLIP-FLOP, PULSE TRIGGERED 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | JOINT ELECTRON DEVICE ENGINEERING COUNCIL T0-86 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MINIMUM POWER SOURCE -1.5 AND VOLTS MAXIMUM POWER SOURCE 5.5 |
| CZEQ | TIME RATING PER CHACTERISTIC | NANOSECONDS NOMINAL PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT 15.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | FLAT LEADS 14 |
Supersedes
This item replaces cancelled NIINs 001027496 · 001618865 · 004526513 · 004546243 · 008654604. An older drawing citing one of those numbers resolves here.