NSN 5905-00-080-3792 · NIIN 000803792 · FSC 5905
NO DASHES 5905000803792
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.995 AND INCHES MAXIMUM 2.005 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| AAPN | SECTION QUANTITY | 1 |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 5000.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2615198 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 4 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.885 AND INCHES MAXIMUM 0.925 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 348.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.50 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.10 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| AEFZ | SHAFT RUNOUT | INCHES 0.00005 |
| AEGA | LATERAL RUNOUT | INCHES 0.004 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.002 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.004 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.5 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 348.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |