NSN 5935-00-928-0948 · NIIN 009280948 · FSC 5935
NO DASHES 5935009280948
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 |
| AFQW | MATING END QUANTITY | 1 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.812 |
| AFQJ | CABLE ENTRANCE DIAMETER | INCHES NOMINAL 0.312 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.708 AND INCHES MAXIMUM 0.728 |
| ADZC | ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.116 AND INCHES MAXIMUM 0.125 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END SINGLE CONTACT GROUPING COPPER ALLOY |
| AAQL | BODY STYLE | |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 1.031 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 1.031 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.625 AND INCHES MAXIMUM 2.140 |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.012 |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-26500 |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -ILG-45204,TYE 2,CLASS 2 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY 6061 |
| CSWM | SHELL SURFACE TREATMENT | ANODIZE |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES NOMINAL 0.812 |
| CXCG | INCLUDED CONTACT QUANTITY | 12 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26500 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-325,CO- 6061,GRADE T6 |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
Supersedes
This item replaces cancelled NIINs 001037905 · 009659410. An older drawing citing one of those numbers resolves here.