NSN 6625-00-489-0586 · NIIN 004890586 · FSC 6625
NO DASHES 6625004890586
In Stock
VOLTMETER
Electrical and Electronic Properties Measuring and Testing Instruments
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 3 |
| ZZZV | FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| SUPP | SUPPLEMENTARY FEATURES | INTERNAL RESISTANCE: 105 OHMS PLUS OR MINUS 20 PERCENT; REQUIRES MILITARY APPROVED 0.6 AND 3.0 MEGOHM EXTERNAL RESISTORS NOT FURNISHED |
| AACT | CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| BHDC | SCALE GRADUATION TYPE | SINGLE INDICATOR ALL RANGES LINEAR |
| BHMW | MEASUREMENT RANGE | SINGLE INDICATOR FIRST RANGE KILOVOLTS, DC 0.0 TO 3.0 |
| ADZC | ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND VIBRATION RESISTANT AND WATER RESISTANT |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.160 |
| AMKD | INDICATOR TYPE | DIAL W/POINTER |
| AMQY | INSTALLATION DESIGN | PANEL |
| APSW | METER BODY DIAMETER BEHIND MOUNTING FLANGE | INCHES NOMINAL 2.750 |
| AQEC | MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| ASSS | POINTER COLOR | SINGLE INDICATOR ALL RANGES BLACK |
| AWZJ | POWER SOURCE | EXTERNAL |
| APMM | DIAL SCALE MARKING COLOR | SINGLE INDICATOR ALL RANGES BLACK |
| APPN | ACCURACY IN PERCENT | SINGLE INDICATOR ALL RANGES AT FULL SCALE -2.0 TO 2.0 |
| APST | METER DEPTH BEHIND MOUNTING FLANGE | INCHES NOMINAL 2.010 |
| HUES | COLOR | BACKGROUND SINGLE INDICATOR ALL RANGES WHITE |
| MARK | SPECIAL MARKINGS | USE WITH EXTERNAL RESISTOR |
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.260 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.157 |
| ABWG | SCALE DIVISION QUANTITY | 60 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 3.500 |
| BHMW | MEASUREMENT RANGE | SINGLE INDICATOR SECOND RANGE VOLTS, DC 0.0 TO 600.0 |
| BLSB | SCALE SELECTION METHOD | TERMINAL |
| CBBL | FEATURES PROVIDED | EXTERNAL SHUNTING AND ZERO ADJUSTER |
| CTQL | MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CTTD | CIRCUIT ATTACHMENT METHOD AND QUANTITY | THREADED STUD 4 |
| FEAT | SPECIAL FEATURES | RUGGEDIZED |
| MATT | MATERIAL | PLASTIC PHENOLIC |
| NHCF | NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| SFTT | SURFACE TREATMENT | ENAMEL |
| SPCL | SPECIAL TEST FEATURES | MEETS REQUIREMENTS OF ASA STANDARD C39.1-1964 |
| STYL | STYLE DESIGNATOR | |
| ANRL | MOUNTING ARRANGEMENT STYLE | |
| ANTG | SENSITIVITY RATING | MILLIAMPERES 1.0 |