NSN 3020-00-115-5229 · NIIN 001155229 · FSC 3020
NO DASHES 3020001155229
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.3130 |
| AJLA | TEETH QUANTITY | 84 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.344 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.375 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 007328460. An older drawing citing one of those numbers resolves here.