NSN 5999-00-400-3099 · NIIN 004003099 · FSC 5999
NO DASHES 5999004003099
In Stock
DELAY LINE
Miscellaneous Electrical and Electronic Components
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CCFC | DISTANCE FROM END OF BODY TO CENTER OF SHAFT | INCHES NOMINAL 0.250 |
| CCDX | PULSE RISE TIME RATING | NANOSECONDS 60.0 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.780 |
| ADAT | BODY WIDTH | INCHES NOMINAL 1.250 |
| AEDX | SHAFT STYLE | |
| CCDQ | SECTION DELAY TIME | NANOSECONDS MINIMUM SINGLE SECTION 0.000 AND NANOSECONDS MAXIMUM SINGLE SECTION 400.000 |
| ANSL | INPUT IMPEDANCE RATING | OHMS 100.000 |
| ANSR | OUTPUT IMPEDANCE RATING | OHMS 100.000 |
| BZWM | SIGNAL DELAY METHOD | INDUCTANCE |
| CCDN | DELAY TIME VARIATION METHOD | VARIABLE |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| ACZT | ADJUSTMENT DEVICE QUANTITY | 1 |
| ACZU | ADJUSTMENT DEVICE DRIVE TYPE | SHAFT |
| ARBR | BODY DEPTH | INCHES NOMINAL 7.625 |
| CCFD | DISTANCE FROM BOTTOM OF BODY TO CENTER OF SHAFT | INCHES NOMINAL 0.937 |
| CSCF | TERMINAL TYPE | TURRET |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-2681144 |
| THDS | THREAD SIZE AND SERIES/TYPE DESIGNATOR | UNEF 0.375-32 AND UNIFIED NATIONAL COARSE (UNC) 0.138-32 |
| ZZZV | FSC APPLICATION DATA | RADAR SETS FIRE CONTROL NONAIRBORNE |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | INCHES NOMINAL 5.641 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 65.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXD | BUSHING LENGTH | INCHES NOMINAL 0.500 |
| AAZT | SLOT DEPTH | INCHES NOMINAL 0.052 |
| ABFY | OVERALL DEPTH | INCHES NOMINAL 8.750 |
| ABGC | SLOT WIDTH | INCHES NOMINAL 0.072 |
| AKPV | MOUNTING FACILITY QUANTITY | 1 AND 2 |
| AAQL | BODY STYLE | |
| AARA | TERMINAL QUANTITY | 4 |
| AZGM | MOUNTING FACILITY | THREADED BUSHING AND THREADED STUD(S) |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | |
| BHTH | ATTENUATION IN DECIBELS | 1.500 |
| AAJD | THREAD CLASS | 2A |
| AGXF | STUD LENGTH | INCHES NOMINAL 0.530 |