NSN 6105-01-513-7715 · NIIN 015137715 · FSC 6105
NO DASHES 6105015137715
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Application: DRAIN CLEANER MODEL K-75A
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.375 |
| AGAV | END ITEM IDENTIFICATION | DRAIN CLEANER MODEL K-75A |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-45 DEG |
| BKPB | CURRENT RATING METHOD | LOCKED ROTOR |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CNMM | FRAME SIZE DESIGNATION | 56 |
| CNXS | POWER RATING | INPUT HORSEPOWER 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.031 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.375 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 7.200 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | CAP START;UL&CSA STANDARDS;115-120 VOLTS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |