NSN 3040-00-350-3180 · NIIN 003503180 · FSC 3040
NO DASHES 3040003503180
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FOURTH PORTION INCHES NOMINAL 1.250 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES NOMINAL 1.575 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 2.813 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 2.000 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 1.000 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END THIRD PORTION INCHES NOMINAL 1.250 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 3.188 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 3.188 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FOURTH PORTION INCHES NOMINAL 0.344 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 3.500 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 3.500 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFG | WORM HELIX ANGLE | 5 DEG 41 MIN |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END FIFTH PORTION SAE |
| AKAF | SHAFT THREAD DIRECTION | FIRST END FIFTH PORTION RIGHT-HAND |
| BYFR | TEETH HARDNESS RATING | ROCKWELL C MINIMUM 56.3 AND ROCKWELL C MAXIMUM 62.5 |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.9375 |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | BOTH ENDS INCHES NOMINAL 0.2970 |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 3.596 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 3.000 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 27.500 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 1.000 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | FIRST END FIFTH PORTION INCHES NOMINAL 0.469 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 17.188 |
| ABRR | KEYWAY WIDTH | FIRST END FIFTH PORTION INCHES NOMINAL 0.312 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END THIRD PORTION INCHES NOMINAL 1.500 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 2.000 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES NOMINAL 1.575 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES NOMINAL 1.500 |
| CFFM | SHAFT HARDNESS RATING | LOCATION NOT OTHERWISE SPECIFIED ROCKWELL C MINIMUM 20.3 AND ROCKWELL C MAXIMUM 32.2 |
| MATT | MATERIAL | STEEL COMP 2315 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 2315 |
| ZZZV | FSC APPLICATION DATA | WINCH,TACTICAL VEHICLE |