NSN 2805-00-374-3091 · NIIN 003743091 · FSC 2805
NO DASHES 2805003743091
In Stock
CONNECTING ROD,PISTON
Gasoline Reciprocating Engines, Except Aircraft; and Components
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BRNK | BODY THICKNESS AT PISTON CONNECTING END | INCHES NOMINAL 0.625 |
| BRNL | BODY THICKNESS AT SHAFT CONNECTING END | INCHES NOMINAL 0.781 |
| AETC | METALLIC HARDNESS RATING | MINIMUM BRINELL TUNGSTEN CARBIDE 187.0 AND MAXIMUM BRINELL TUNGSTEN CARBIDE 223.0 |
| AKEU | SHAFT CONNECTING END STYLE | |
| AXPW | END THICKNESS | INCHES NOMINAL 1.250 |
| BQBN | EDGE RADIUS | INCHES NOMINAL 0.625 |
| BQCZ | SHAFT CONNECTING END LUBRICATION DRILL FEATURE | NOT INCLUDED |
| BRNJ | BODY WIDTH AT SHAFT CONNECTING END | INCHES NOMINAL 1.125 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARN | FABRICATION METHOD | FORGED |
| BQDB | SHAFT CONNECTING END LUBRICATION METHOD | FORCED FEED |
| BRNG | CENTER TO CENTER EFFECTIVE LENGTH | INCHES MINIMUM 9.498 AND INCHES MAXIMUM 9.502 |
| BRNH | BODY WIDTH AT PISTON CONNECTING END | INCHES NOMINAL 0.812 |
| BQCH | SHAFT CONNECTING END THICKNESS | INCHES NOMINAL 1.438 |
| BQCY | SHAFT CONNECTING END BEARING REPLACEABILITY | NONREPLACEABLE |
| BXYS | PISTON END CONNECTION STYLE | |
| MATT | MATERIAL | STEEL COMP 1035 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 1035 |
| BQCC | SHAFT CONNECTING END HOLE INSIDE DIAMETER | INCHES NOMINAL 1.312 |
| BQCF | SHAFT CONNECTING END EDGE RADIUS | INCHES NOMINAL 0.656 |
| BQCG | SHAFT CONNECTING END WIDTH | INCHES MINIMUM 2.748 AND INCHES MAXIMUM 2.752 |
| BQBZ | PISTON CONNECTING END LUBRICATION METHOD | FULL FORCED FEED |
| BQCB | SHAFT CONNECTING END BEARING | INCLUDED |
| BQBP | END HOLE INSIDE DIAMETER | INCHES NOMINAL 1.188 |
| BQBT | PISTON CONNECTING END BEARING | INCLUDED |
| BQBW | BEARING REPLACEABILITY | REPLACEABLE |
| BQBY | PISTON CONNECTING END LUBRICATION DRILL FEATURE | INCLUDED |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| H5000-100B8 | 54764 |
| M5000-10088 | 54764 |
| DA48ASI | 66289 |
| DA48AS1 | 66289 |
| DA48SI | 66289 |
| DA48 | 66289 |
| DA48S1 | 66289 |
| 471208 | 00447 |
Supersedes
This item replaces cancelled NIINs 001468746 · 003083902 · 005368744. An older drawing citing one of those numbers resolves here.