NSN 2805-00-735-9855 · NIIN 007359855 · FSC 2805
NO DASHES 2805007359855
In Stock
CONNECTING ROD,PISTON
Gasoline Reciprocating Engines, Except Aircraft; and Components
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BRNJ | BODY WIDTH AT SHAFT CONNECTING END | INCHES NOMINAL 1.100 |
| BRNK | BODY THICKNESS AT PISTON CONNECTING END | INCHES NOMINAL 0.900 |
| AETC | METALLIC HARDNESS RATING | MINIMUM BRINELL TUNGSTEN CARBIDE 60.0 AND MAXIMUM BRINELL TUNGSTEN CARBIDE 80.0 |
| AKEU | SHAFT CONNECTING END STYLE | |
| AWQD | STRENGTH RATING | POUNDS PER SQUARE INCH (PSI) MINIMUM TENSILE 30000.0 |
| AXPW | END THICKNESS | INCHES NOMINAL 1.125 |
| BQCH | SHAFT CONNECTING END THICKNESS | INCHES NOMINAL 1.125 |
| BRNH | BODY WIDTH AT PISTON CONNECTING END | INCHES NOMINAL 1.045 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARN | FABRICATION METHOD | MACHINED |
| BQCZ | SHAFT CONNECTING END LUBRICATION DRILL FEATURE | NOT INCLUDED |
| BQDB | SHAFT CONNECTING END LUBRICATION METHOD | FULL FORCED FEED |
| BRNG | CENTER TO CENTER EFFECTIVE LENGTH | INCHES NOMINAL 5.000 |
| BQCF | SHAFT CONNECTING END EDGE RADIUS | INCHES NOMINAL 1.062 |
| BQCG | SHAFT CONNECTING END WIDTH | INCHES NOMINAL 2.920 |
| BRNL | BODY THICKNESS AT SHAFT CONNECTING END | INCHES NOMINAL 1.020 |
| BXYS | PISTON END CONNECTION STYLE | |
| MATT | MATERIAL | ALUMINUM ALLOY |
| BQBZ | PISTON CONNECTING END LUBRICATION METHOD | FULL FORCED FEED |
| BQCB | SHAFT CONNECTING END BEARING | NOT INCLUDED |
| BQCC | SHAFT CONNECTING END HOLE INSIDE DIAMETER | INCHES NOMINAL 1.604 |
| BQBT | PISTON CONNECTING END BEARING | NOT INCLUDED |
| BQBY | PISTON CONNECTING END LUBRICATION DRILL FEATURE | NOT INCLUDED |
| BQBN | EDGE RADIUS | INCHES NOMINAL 0.500 |
| BQBP | END HOLE INSIDE DIAMETER | INCHES NOMINAL 0.750 |
| BQBQ | PISTON PIN ANCHOR HOLE DIAMETER | INCHES NOMINAL 0.187 |
| BQBS | ANGLE BETWEEN ANCHOR PIN HOLE AND ROD CENTERLINES IN DEG | 90.0 |