NSN 2805-00-927-3322 · NIIN 009273322 · FSC 2805
NO DASHES 2805009273322
In Stock
CONNECTING ROD,PISTON
Gasoline Reciprocating Engines, Except Aircraft; and Components
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BRNL | BODY THICKNESS AT SHAFT CONNECTING END | INCHES NOMINAL 0.780 |
| BXYS | PISTON END CONNECTION STYLE | |
| FEAT | SPECIAL FEATURES | U/O CYLINDER NO. 2,4,AND 6 |
| MATT | MATERIAL | STEEL COMP 1141 |
| AKEU | SHAFT CONNECTING END STYLE | |
| AXPW | END THICKNESS | INCHES MINIMUM 1.060 AND INCHES MAXIMUM 1.070 |
| BQBN | EDGE RADIUS | INCHES NOMINAL 0.670 |
| BRNK | BODY THICKNESS AT PISTON CONNECTING END | INCHES NOMINAL 0.562 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARN | FABRICATION METHOD | FORGED AND MACHINED |
| AETC | METALLIC HARDNESS RATING | MINIMUM BRINELL TUNGSTEN CARBIDE 241.0 AND MAXIMUM BRINELL TUNGSTEN CARBIDE 269.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD SINGLE MATERIAL RESPONSE FED-STD-66 AISI 1141 |
| ZZZV | FSC APPLICATION DATA | ENGINE,GASOLINE,VEHICULAR |
| BQCZ | SHAFT CONNECTING END LUBRICATION DRILL FEATURE | INCLUDED |
| BQDB | SHAFT CONNECTING END LUBRICATION METHOD | SPLASH |
| BRNG | CENTER TO CENTER EFFECTIVE LENGTH | INCHES MINIMUM 6.998 AND INCHES MAXIMUM 7.002 |
| BQBY | PISTON CONNECTING END LUBRICATION DRILL FEATURE | INCLUDED |
| BQBZ | PISTON CONNECTING END LUBRICATION METHOD | SPLASH |
| BQCB | SHAFT CONNECTING END BEARING | NOT INCLUDED |
| BQCC | SHAFT CONNECTING END HOLE INSIDE DIAMETER | INCHES NOMINAL 2.187 |
| BQCF | SHAFT CONNECTING END EDGE RADIUS | INCHES NOMINAL 1.688 |
| BQCG | SHAFT CONNECTING END WIDTH | INCHES MINIMUM 3.252 AND INCHES MAXIMUM 3.255 |
| BQCH | SHAFT CONNECTING END THICKNESS | INCHES MINIMUM 1.304 AND INCHES MAXIMUM 1.306 |
| BQBP | END HOLE INSIDE DIAMETER | INCHES NOMINAL 0.860 |
| BQBT | PISTON CONNECTING END BEARING | INCLUDED |
| BQBW | BEARING REPLACEABILITY | REPLACEABLE |
| BRNJ | BODY WIDTH AT SHAFT CONNECTING END | INCHES NOMINAL 0.910 |
| BRNH | BODY WIDTH AT PISTON CONNECTING END | INCHES NOMINAL 0.780 |