NSN 2810-00-219-7381 · NIIN 002197381 · FSC 2810
NO DASHES 2810002197381
In Stock
PISTON,INTERNAL COMBUSTION ENGIN
Gasoline Reciprocating Engines, Aircraft Prime Mover; and Components
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXFR | FINISHED SIZE DESIGNATION | STANDARD |
| AXFT | SKIRT TYPE | SOLID |
| AXFZ | RING GROOVE QUANTITY | 5 |
| AXGB | RING GROOVE WIDTH | EIGHTH RING INCHES MAXIMUM 0.1015 |
| AXGB | RING GROOVE WIDTH | FIFTH RING INCHES MINIMUM 0.1055 |
| AXGD | RING GROOVE DIAMETER | FOURTH RING INCHES MAXIMUM 5.550 |
| AXGD | RING GROOVE DIAMETER | SECOND RING INCHES MAXIMUM 5.550 |
| AGYE | SURFACE FINISH | FINISHED |
| AXGD | RING GROOVE DIAMETER | SIXTH RING INCHES MAXIMUM 5.550 |
| AXGD | RING GROOVE DIAMETER | THIRD RING INCHES MINIMUM 5.537 |
| AXGE | RING GROOVE POSITION BELOW PISTON PIN | NO.1 AND NO.2 AND NO. 3,NO.4 ANDNO.5 ALL RINGS |
| AXPK | DISTANCE FROM PIN HOLE CENTER TO EXTREME TOP | INCHES MINIMUM 2.3720 AND INCHES MAXIMUM 2.3791 |
| AXPM | DISTANCE BETWEEN PIN BOSSES | INCHES MINIMUM 1.970 AND INCHES MAXIMUM 1.980 |
| AXPQ | PIN TYPE FOR WHICH DESIGNED | FLOATING |
| MATT | MATERIAL | ALUMINUM |
| AXGB | RING GROOVE WIDTH | SECOND RING INCHES MAXIMUM 0.1180 |
| AXGB | RING GROOVE WIDTH | SEVENTH RING INCHES MINIMUM 0.1005 |
| AXGB | RING GROOVE WIDTH | SIXTH RING INCHES MAXIMUM 0.1065 |
| AXGB | RING GROOVE WIDTH | THIRD RING INCHES MINIMUM 0.1166 |
| AXGC | GROOVE TAPER ANGLE | 7 DEG PORM 5 MINUTES |
| AXGD | RING GROOVE DIAMETER | EIGHTH RING INCHES MAXIMUM 5.550 |
| AXGD | RING GROOVE DIAMETER | FIFTH RING INCHES MINIMUM 5.537 |
| AXGD | RING GROOVE DIAMETER | FIRST RING INCHES MINIMUM 5.537 |
| RGAQ | RING GROOVE POSITION AND QUANTITY | AND NO.2 AND NO. 3,NO.4 ANDNO.5 |
| SFTT | SURFACE TREATMENT | NICKEL |
| WGHT | WEIGHT | OUNCES 77.0 |
| AASK | HEAD STYLE | |
| ZZZV | FSC APPLICATION DATA | ACFT ENG R1300 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 4.086 |
| ABMZ | DIAMETER | INCHES NOMINAL 6.125 |
| ACXM | OIL PASSAGE TYPE | LOCATION NOT OTHERWISE SPECIFIED HOLE |
| ACXU | PINHOLE DIAMETER | INCHES MINIMUM 1.4985 AND INCHES MAXIMUM 1.4995 |
| AXGB | RING GROOVE WIDTH | FIRST RING INCHES MINIMUM 0.1166 |
| AXGB | RING GROOVE WIDTH | FOURTH RING INCHES MAXIMUM 0.1180 |
| AXGD | RING GROOVE DIAMETER | SEVENTH RING INCHES MINIMUM 5.537 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 170506 | 0AHP5 |
Supersedes
This item replaces cancelled NIIN 000489114. An older drawing citing one of those numbers resolves here.