NSN 5305-00-851-4147 · NIIN 008514147 · FSC 5305
NO DASHES 5305008514147
In Stock
SCREW,EXTERNALLY RELIEVED BODY
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | SCREW, EXTERNALLY RELIEVED BODY, STEEL, CAD PLD, SAE-AMS-S-6758 MATL, 4-40 NC 3A X 13/16, 0.240-0.260 IN. DIA OF HEAD, 0.105 IN. HEIGHT OF HEAD; 0.194 IN. THD LG; 0.138-0.142 IN. FIRST DIA FRM HEAD; 0.070-080IN. SECOND DIA FROM HEAD; 0.547 IN. FROM HEAD TO END OF FIRST DIA; 0.618 IN. FROM HD TO END OF SECOND DIA.; SPEC APPLIES EXCEPT AS INDICATED |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6098 OR MIL SPEC 4TH MATERIAL RESPONSE -IL-S-6049 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.112 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES NOMINAL 0.547 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 |
| AAWJ | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | INCHES NOMINAL 0.618 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.812 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81348-FF-S-92 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE I AND STYLE 8S |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.812 |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.105 |
| AAWD | SECOND DIAMETER FROM HEAD | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.138 AND INCHES MAXIMUM 0.142 |