NSN 2835-01-224-9792 · NIIN 012249792 · FSC 2835
NO DASHES 2835012249792
In Stock
INSULATION,DUCT
Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components
Technical characteristics
4 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INSULATION EXHAUST DUCT |
| FEAT | SPECIAL FEATURES | INSULATION SHALL MEET THE FOLLOWING CONDITIONS: TYPE: INSULATION MUST CONFORM TO MIL-I-16411; DUCT WALL TEMPERATURE: 1000 DEGREES FAHRENHEIT; DUCT WALL MATERIAL: AISI 321 STAINLESS STEEL; CONSTRUCTION: BLAKET SHALL BE ENCLOSED ON THE HOT SIDE AND SIDES WITH STAINLESS STEEL KNITTED MESH; THE OUTSIDE FACE SHALL BE FINISHED WITH A LAYER OF STYLE 1925 OR 2025 FIBERGLASS CLOTH ALUMINIZED ON OUTER FACE FOR APPEARANCE; THE BLANKET SHALL BE TUFTED ON APPROXIMATELY 8" CENTERS WITH TWO 2-HOLE SST WASHERS (ONE ON EACH SIDE OF THE BLANKET) SECURED WITH STAINLESS STEEL WIRE; THE EDGES OF THE BLNAKET SHALL CONTAIN THE TUFT ASSEMBLY PLUS THE STAINLESS STEEL LACING HOOKS WITH THE LACING WIRE EYELETS TOWARDS THE BLNKET OUTER EDGES AS SHOWN ON DRAWING |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
Supersedes
This item replaces cancelled NIIN 012166212. An older drawing citing one of those numbers resolves here.