NSN 2840-01-206-2249 · NIIN 012062249 · FSC 2840
NO DASHES 2840012062249
In Stock
TRANSMITTER ASSEMBLY
Gas Turbines and Jet Engines, Aircraft, Prime Moving; and Components
Application: AIRCRAFT ENGINE MODEL F404
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT ENGINE MODEL F404 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | TRANSMITTER ASSEMBLY, FAN SPEED |
| FEAT | SPECIAL FEATURES | HEAD HEIGHT: .464-.509" |
| FTLD | FUNCTIONAL DESCRIPTION | MUST CONFORM TO P1TF3 CLASS A (INTERPRETATION OF DRAWING); P23TF3 (IDENTIFICATION MARKING) |
| SUPP | SUPPLEMENTARY FEATURES | MID-HOLE TO MID-HOLE (HORIZONTAL): 1.036"; MID-HOLE TO MID-HOLE (VERTICAL): 0.790" |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATING SURFACES TO BE PREPARED WITH ADHESIVE PRIMER A15B4IX3; EXCESS PRIMER MUST BE REMOVED AND ASSEMBLY ALLOWED TO AIR DRY FOR 5 MINUTES MINIMUM; APPLY ADHESIVE A15B41A7 TO ITEM 4 (SURFACE X ONLY); ASSEMBLE ITEMS 3,4 AND 5 TO ITEM 2 AND CLAMP UNDER 42-45" / LBS; TORQUE (.190-32 THREAD) AT EACH MOUNTING HOLE LOCATION; CURE WHILE CLAMPED AT 200 DEGREES FAHRENHEIT FOR 20 MINUTES MINIMUM OR AT ROOM TEMPERATURE FOR 24 HOURS; REMOVE EXCESS ADHESIVE FROM ITEMS 3 AND 4 AFTER CURE |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 473457 | 60678 |
| 5033T75G05 | 60678 |
| 2840PL2276637 | 9009H |
| 5033T75G05 | 99207 |
| 10158687 | A486G |
| 5033T75G05 | 03350 |