NSN 6105-01-151-5835 · NIIN 011515835 · FSC 6105
NO DASHES 6105011515835
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 7.125 |
| AAJU | OVERALL LENGTH | INCHES 11.562 |
| AAJV | OVERALL WIDTH | INCHES 6.000 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | AUTOMATIC RESET AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 48 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.3333 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 6.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.687 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1550.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.750 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.300 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 230.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |