NSN 2920-00-004-8360 · NIIN 000048360 · FSC 2920
NO DASHES 2920000048360
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.830 |
| ABFF | FURNISHED ITEMS | COOLING FAN AND NUT |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.132 |
| ADER | MOUNTING STYLE | |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.900 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.900 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 3.947 AND INCHES MAXIMUM 4.053 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 5.047 AND INCHES MAXIMUM 5.151 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.514 AND INCHES MAXIMUM 0.524 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.500 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| ELEC | VOLTAGE IN VOLTS | 24.0 |