NSN 2920-00-071-2345 · NIIN 000712345 · FSC 2920
NO DASHES 2920000712345
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| ABFF | FURNISHED ITEMS | COOLING FAN AND LOCKWASHER AND NUT AND WOODRUFF KEY |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| BCMM | ANGULAR DEVIATION OF FOURTH HOLE FROM THIRD HOLE IN DEG | 150.0 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.280 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.240 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 30.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.510 |
| BCML | ANGULAR DEVIATION OF THIRD HOLE FROM SECOND HOLE IN DEG | 150.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002473264 · 006916245. An older drawing citing one of those numbers resolves here.