NSN 2920-00-127-4680 · NIIN 001274680 · FSC 2920
NO DASHES 2920001274680
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.790 |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.320 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 2.110 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.750 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.480 AND INCHES MAXIMUM 8.560 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.451 AND INCHES MAXIMUM 0.463 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.180 AND INCHES MAXIMUM 7.260 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.750 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |