NSN 2920-00-137-1958 · NIIN 001371958 · FSC 2920
NO DASHES 2920001371958
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.450 |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.840 |
| ADER | MOUNTING STYLE | |
| ADPY | PILOT HEIGHT | INCHES NOMINAL 0.390 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 61.0 |
| BCGM | RECTIFIER LOCATION | SEPARATE |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.330 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.330 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.380 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| FEAT | SPECIAL FEATURES | HEX HOLE IN SHAFT END |