NSN 2920-00-167-8549 · NIIN 001678549 · FSC 2920
NO DASHES 2920001678549
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.750 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.250 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 1.219 AND INCHES MAXIMUM 1.281 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.562 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.344 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.750 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2700 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 180.0 |
| BCGM | RECTIFIER LOCATION | SEPARATE |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 4.125 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 4.125 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.256 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.681 AND INCHES MAXIMUM 7.694 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 19207-11640180 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 11640180 | 19207 |
| 5516A | 24975 |
| 5516AA | 24975 |
| 5516AA | 35510 |
| A0011516AA | 35510 |
| A0015516AA | 35510 |
| 5516A | 35510 |