NSN 2920-00-192-9022 · NIIN 001929022 · FSC 2920
NO DASHES 2920001929022
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 2500 |
| BZRR | THREAD SERIES | UNS |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.669 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.379 AND INCHES MAXIMUM 0.387 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.900 |
| AAJE | THREAD PITCH DIAMETERS | INCHES 0.6324 TO 0.6365 |
| BCGN | GROUNDING METHOD | INTERNAL OR EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES MINIMUM 3.740 AND INCHES MAXIMUM 3.760 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES MINIMUM 3.720 AND INCHES MAXIMUM 3.780 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.750 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1000 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 60.0 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.531 |
| ABFF | FURNISHED ITEMS | COOLING FAN AND WOODRUFF KEY |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.620 AND INCHES MAXIMUM 8.780 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.669 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.180 AND INCHES MAXIMUM 7.260 |