NSN 2920-00-217-3474 · NIIN 002173474 · FSC 2920
NO DASHES 2920002173474
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADER | MOUNTING STYLE | |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.453 |
| AARA | TERMINAL QUANTITY | 3 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.328 |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.438 |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| ADZC | ENVIRONMENTAL PROTECTION | FUNGUS RESISTANT |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MAXIMUM 29.5 AND MINIMUM 28.0 |
| ANYC | SYSTEM VOLTAGE RATING | 24.0 |
| ANYD | SYSTEM GROUND POLARITY | POSITIVE |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| ANYJ | CURRENT REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 57.0 AND MAXIMUM 63.0 |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 25.0 AND MAXIMUM 27.0 |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
| APAT | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES ALONG LENGTH | INCHES NOMINAL 6.000 |
| APAW | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES AND PLAIN HOLES ALONG WIDTH | INCHES NOMINAL 5.250 |
| CBBL | FEATURES PROVIDED | SHOCK MOUNT(S) |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED THREADED STUD |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 006407783. An older drawing citing one of those numbers resolves here.