NSN 2920-00-294-3479 · NIIN 002943479 · FSC 2920
NO DASHES 2920002943479
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 8.0 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 14 |
| ABFF | FURNISHED ITEMS | COTTER PIN HOLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.438 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.217 |
| ABSA | SPLINE QUANTITY | 6 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 26.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 880 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.181 AND INCHES MAXIMUM 8.195 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.453 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 1.938 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1500 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.874 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 1800 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.906 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |