NSN 2920-00-351-9653 · NIIN 003519653 · FSC 2920
NO DASHES 2920003519653
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXFH | SPLINE LENGTH | INCHES NOMINAL 1.625 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.698 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.874 AND INCHES MAXIMUM 0.8745 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 900 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCGW | DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 130.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 100.0 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 24 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.750 |
| BCMK | DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | INCHES NOMINAL 7.812 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
| ABSA | SPLINE QUANTITY | 6 |
| AAUK | SPLINE WIDTH | INCHES MINIMUM 0.216 AND INCHES MAXIMUM 0.217 |