NSN 2920-00-353-9544 · NIIN 003539544 · FSC 2920
NO DASHES 2920003539544
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2200 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 10.0 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.719 |
| ABFF | FURNISHED ITEMS | COTTER PIN HOLE |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 2400 |
| BZRR | THREAD SERIES | UNF |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 6.118 AND INCHES MAXIMUM 6.136 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 6.868 AND INCHES MAXIMUM 6.886 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.344 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.250 |
| ADER | MOUNTING STYLE | |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.324 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |