NSN 2920-00-358-7546 · NIIN 003587546 · FSC 2920
NO DASHES 2920003587546
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 5.9 AND MAXIMUM 6.7 |
| AARA | TERMINAL QUANTITY | 3 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.278 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 1.500 |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MINIMUM 6.9 AND MINIMUM 7.3 |
| ANYC | SYSTEM VOLTAGE RATING | 6.0 |
| ANYD | SYSTEM GROUND POLARITY | NEGATIVE |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 38.0 AND MAXIMUM 42.0 |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED SCREW |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| ANYJ | CURRENT REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| ADER | MOUNTING STYLE | |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
| APAK | CENTER TO CENTER DISTANCE BETWEEN HOLES ALONG WIDTH AND HOLE ALONG LENGTH | INCHES NOMINAL 5.060 |
Cross-references
16 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003945991. An older drawing citing one of those numbers resolves here.