NSN 2920-00-377-5229 · NIIN 003775229 · FSC 2920
NO DASHES 2920003775229
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.438 |
| ABFF | FURNISHED ITEMS | VOLTAGE REGULATOR AND WOODRUFF KEY |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 330.0 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 10.0 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCMP | MOUNTING HOLE LARGEST DIAMETER | INCHES NOMINAL 0.500 |
| BCMQ | MOUNTING HOLE SMALLEST DIAMETER | INCHES NOMINAL 0.312 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMR | MOUNTING PILOT OUTSIDE DIAMETER | INCHES MINIMUM 3.246 AND INCHES MAXIMUM 3.248 |
| BCMS | DISTANCE FROM MOUNTING HOLE CENTER TO END OF HOUSING | INCHES NOMINAL 1.500 |
| BCMT | MOUNTING PILOT DEPTH | INCHES NOMINAL 2.594 |
| BCGS | SHAFT DRIVE END STYLE | |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.000 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ADFQ | COUNTERSUNK MOUNTING HOLE ANGLE IN DEG | 30.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.188 |
| ACJD | MOUNTING HOLE DEPTH | INCHES NOMINAL 0.500 |
| ADER | MOUNTING STYLE | |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.750 |