NSN 2920-00-377-5237 · NIIN 003775237 · FSC 2920
NO DASHES 2920003775237
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ELEC | VOLTAGE IN VOLTS | 6.0 |
| ZZZV | FSC APPLICATION DATA | ENGINEELECTRICAL SYSTEM,NONAIRCRAFT |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1850 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.375 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.312 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.719 |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.669 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.324 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.118 AND INCHES MAXIMUM 8.132 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002943474 · 007347274 · 007347270 · 007743935. An older drawing citing one of those numbers resolves here.