NSN 2920-00-444-7100 · NIIN 004447100 · FSC 2920
NO DASHES 2920004447100
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 55.0 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.812 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADPY | PILOT HEIGHT | INCHES NOMINAL 0.312 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.500 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 20 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| FEAT | SPECIAL FEATURES | END ITEM: GRUMMAN AIRCRAFT,MODEL A10 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| BCMG | TOP MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.250 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.500 |
| BCMJ | CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | INCHES NOMINAL 6.250 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.406 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 2.000 |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY AND NUT AND BUSHING PACKAGE AND FAN PULLEY |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.625 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.094 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 1.688 |
| CFHL | THREAD CLASS | 2A |
| BZRR | THREAD SERIES | UNF |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.