NSN 2920-00-450-0025 · NIIN 004500025 · FSC 2920
NO DASHES 2920004500025
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.300 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.450 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.300 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGS | SHAFT DRIVE END STYLE | |
| ADER | MOUNTING STYLE | |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.382 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.840 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 004354457. An older drawing citing one of those numbers resolves here.