NSN 2920-00-640-7492 · NIIN 006407492 · FSC 2920
NO DASHES 2920006407492
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADER | MOUNTING STYLE | |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1850 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.375 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 7600 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 6.0 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.719 |
| ABFF | FURNISHED ITEMS | OVERLOAD PROTECTIVE DEVICE |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.688 AND INCHES MAXIMUM 0.689 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1600 |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.312 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.785 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.368 AND INCHES MAXIMUM 8.382 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.328 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |