NSN 2920-00-760-3151 · NIIN 007603151 · FSC 2920
NO DASHES 2920007603151
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.060 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1680 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 14.0 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.060 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.324 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.669 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES MINIMUM 0.864 AND INCHES MAXIMUM 0.906 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.312 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.780 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.115 AND INCHES MAXIMUM 7.139 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.445 AND INCHES MAXIMUM 8.569 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CFHL | THREAD CLASS | 2A |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.560 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 001362133 · 010056878. An older drawing citing one of those numbers resolves here.