NSN 2920-00-770-6452 · NIIN 007706452 · FSC 2920
NO DASHES 2920007706452
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 6.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.328 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.375 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1850 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.719 |
| ABFF | FURNISHED ITEMS | COTTER PIN HOLE |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.312 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.243 AND INCHES MAXIMUM 7.257 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.759 AND INCHES MAXIMUM 8.773 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
| BCGN | GROUNDING METHOD | INTERNAL |