NSN 2920-00-782-4156 · NIIN 007824156 · FSC 2920
NO DASHES 2920007824156
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES MINIMUM 4.430 AND INCHES MAXIMUM 4.440 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.7794 AND INCHES MAXIMUM 0.780 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 1.220 AND INCHES MAXIMUM 1.245 |
| ADER | MOUNTING STYLE | |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.625 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 6.631 AND INCHES MAXIMUM 6.644 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.131 AND INCHES MAXIMUM 8.144 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES MINIMUM 4.430 AND INCHES MAXIMUM 4.440 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.750 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.627 AND INCHES MAXIMUM 0.630 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 50000 |
| BZRR | THREAD SERIES | UNF |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 0.0 |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 80.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1500 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.750 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 5000 |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.405 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |