NSN 2920-00-830-1293 · NIIN 008301293 · FSC 2920
NO DASHES 2920008301293
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.750 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 8.125 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2000 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 7.250 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.375 |
| BZRR | THREAD SERIES | UNF |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 201.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 100.0 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES MINIMUM 4.115 AND INCHES MAXIMUM 4.135 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 4.120 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.125 |
| ADER | MOUNTING STYLE | |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.750 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ELEC | VOLTAGE IN VOLTS | 28.0 |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.874 |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |