NSN 2920-00-905-9069 · NIIN 009059069 · FSC 2920
NO DASHES 2920009059069
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| AARA | TERMINAL QUANTITY | 3 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.280 |
| ADER | MOUNTING STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ANYJ | CURRENT REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 11.0 AND MAXIMUM 13.0 |
| ANYC | SYSTEM VOLTAGE RATING | 12.0 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 1.310 |
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 12.4 AND MAXIMUM 13.3 |
| ANYZ | CUTOUT CURRENT RATING IN AMPS | MINIMUM 3.0 AND MAXIMUM 5.0 |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
| ANYD | SYSTEM GROUND POLARITY | NEGATIVE OR POSITIVE |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| APAK | CENTER TO CENTER DISTANCE BETWEEN HOLES ALONG WIDTH AND HOLE ALONG LENGTH | INCHES NOMINAL 3.060 |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED SCREW |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MINIMUM 14.1 AND MAXIMUM 14.7 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002281890 · 006407505. An older drawing citing one of those numbers resolves here.