NSN 2920-00-947-5503 · NIIN 009475503 · FSC 2920
NO DASHES 2920009475503
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 20 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE OR POSITIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1970 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.900 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES MINIMUM 3.052 AND INCHES MAXIMUM 3.072 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.060 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.625 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.115 AND INCHES MAXIMUM 7.139 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.935 AND INCHES MAXIMUM 7.959 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.379 AND INCHES MAXIMUM 0.387 |
| BZRR | THREAD SERIES | UN |
| CFHL | THREAD CLASS | 2A |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| ADER | MOUNTING STYLE | |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.460 AND INCHES MAXIMUM 0.550 |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.840 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.625 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| BCGS | SHAFT DRIVE END STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.6684 AND INCHES MAXIMUM 0.669 |