NSN 2920-00-992-0833 · NIIN 009920833 · FSC 2920
NO DASHES 2920009920833
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 167.0 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.810 |
| ADER | MOUNTING STYLE | |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.062 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.060 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BZRR | THREAD SERIES | UNS |
| BCGN | GROUNDING METHOD | INTERNAL |
| BCGS | SHAFT DRIVE END STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.935 AND INCHES MAXIMUM 7.959 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.316 AND INCHES MAXIMUM 0.324 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.115 AND INCHES MAXIMUM 7.139 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.490 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 002295458 · 008464070 · 009834325. An older drawing citing one of those numbers resolves here.